Once the base coat system has been given the time needed to fully cure it's time to apply the final finishing layer.

Before applying the Fibrecoat finish, make sure the base is dry and free from debris and any other contamination. The finish is a single coat UV resistant, colour stable finished supplied ready to use out of the tin.

The Fibrecoat finish should be applied either by brush or roller, with rollers being preferred for larger applications. The finish should be applied to give a uniform even coating totally covering the existing base layer at a nominal dry film thickness of 525 microns, which equates to a coverage rate of 0.75 litres per m² on smooth surfaces.